Introduction; Intended Use; Features; Technical Specifications - ULTIMATE SPEED UPBS 12000 A1 Bedienungs- Und Sicherheitshinweise

• Intended use

This power pack is designed to provide
additional support for 12 V vehicle batteries
in diesel and petrol vehicles with start-up
problems, caused by batteries that are weak,
empty. However, the power pack cannot
replace the vehicle battery. If no more than
300 A are needed, the power pack allows the
user to single-handedly start up the vehicle
when necessary, without additional help from
a third party (max. peak current).
The device also has 2 USB ports. So, if nee-
ded, mobile phones, navigation tools or other
devices using USB ports can be charged.
Any other use can damage the device and put
the user at serious risk.
The manufacturer is not liable for damage
resulting from improper use or incorrect
operation.
This device is not suitable for commercial use.
Commercial use will void the warranty.
The LED bulb is not suitable for
„ „
domestic room lighting.
The LED bulb is suitable for
„ „
extreme temperatures below
-20°C
-20°C.

• Features

As you are unpacking the item after
delivery, ensure that all the parts are
present and that the device is in
perfect condition. Do not use the
device if it is defective.
1
SOS lights
2
Charging port 5V
3a Output USB 5V
3b
Output USB 5V
4 Power button
5
Charge status indicator lights
/1A
/1A
/2A
6
Car's jump start outlet
7 USB power cable
8
Jumper cable
9 Power bank & jump starter
10
Start LED
11
Error LED
12
Power supply adaptor
13
Button LED box
14
12VDC 8A output
15
12V/8A cigarette lighter adapter
16
Storage bag
Note: The terms "product" or "tool" used
in the following text refer to the power bank
& jump starter specified in these operating
instructions.

• Technical specifications

The three individual cells used to construct the
rechargeable battery are connected in series
to produce a total voltage of 4 x 3.2 V ≈ 12 V
and a capacity of 3000mAh. The battery
output produced in this way is the same as
the output from a rechargeable battery with a
total capacity of 12000mAh at 3.2V.
Model:
Type of battery:
Battery capacity:
Charge cycles:
Charge duration:
Peak current:
Starting current:
Operating temperature: 0 - 60°C
Voltage:
Input voltage
(charging port):
Capacity:
Output voltage
(output USB):

Introduction

UPBS 12000 A1
LiFePO4
12000 mAh,
3.2V /38,4Wh
1500
up to 13,5 hours
300A
120A
12V
5V /1A
7000mAh / 5 V
5V /1A / 2A
GB/IE/NI 7