Control - Menus - Nibe Rmu 40 Installateurhandbuch

Selecting options
In an options menu the current selected option is
indicated by a green tick.
To select another option:
1. Mark the applicable option using the up or
down button. One of the options is pre-selec-
ted (white).
2. Press the OK button to confirm the selected
option. The selected option has a green tick.
Setting a value
To set a value:
1. Mark the value you want to set using the
up or down button.
2. Press the OK button. The background of
the value becomes green, which means
that you have accessed the setting mode.
3. Press the up button to increase the value
or the down button to reduce the value.
4. Press the OK button to confirm the value
you have set. To undo and return to the
original value, press the back button.

Control - Menus

Main menu
Sub-menus
Status information for the relevant menu can be found
on the display to the right of the sub-menus.
temperature Setting the temperature for the climate
system. The status information shows the set value for
the climate system.
temporary lux Activation of temporary increase in the
hot water temperature. Status information displays "off"
or what length of time of the temporary temperature in-
crease remains.
ventilation Setting the fan speed. The status information
shows the selected setting. This menu is only displayed
for the exhaust air heat pumps and ground source heat
pumps with the exhaust air module accessory.
op. mode Activation of manual or automatic operating
mode. The status information shows the selected operat-
ing mode.
service settings Setting which climate system is to be
controlled by the room unit. Hold the back button in for
7 seconds to access the Service menu.
GB
15