Technical Data - DeWalt DCF6201 Bedienungsanleitung

ENGLISH
COLLATED MAGAZINE ATTACHMENT
DCF6201
Congratulations
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Screw length suitability
Weight
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: To reduce the risk of injury,
read the instruction manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
14
Additional Specifi c Safety Rules for
DCF6201 Collated Magazine Attachment
mm 25 - 57
• The collated magazine is to only be used with
kg 0.36
• Observe all operating instructions and safety
• Before use, ensure that the magazine accessory
• Avoid body contact with earthed or grounded
• Disconnect the plug from the power source
• When driving screws, never reach into the
• Do not use the magazine accessory as a
• Hold power tool by insulated gripping surfaces,
• Use only screw strips that are suitable to this
WARNING! Read all safety warnings
and all instructions provided with your
screwdriver (DFC620 or DCF621).
Failure to follow the warnings and
instructions may result in electric shock,
fire and/ or serious injury.
the D WALT DCF620 or DCF621 screwdriver.
E
regulations contained in the manual for the
screwdriver the magazine accessory is used
with.
is properly attached to the tool.
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
magazine accessory. Keep hands clear of the
advancing mechanism and the spot where the
screw is being driven.
gripping surface.
when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock.
magazine. Only insert screw strips when the
screwdriver power is off and the trigger is
locked.