Package Contents - Abus PR2800 Montage- Und Bedienungsanleitung

Contents
I. Package contents
Individual parts
II. General information
III. Field of application of the PR2800
IV. Fitting tools
V. Replacing the door cylinder (optional)
VI. Fitting instructions for doors that open inwards
VII. Operating instructions
VIII. Warranty
74
Fitting and operating instructions
for the ABUS reinforced door bar PR2800
75
VdS recognition
76
The VdS recognition only applies in connection with the use of a VdS class A or a higher class
of door cylinder. The reinforced door bar PR2800 with VdS recognition is registered under the
77
number M 116306 VdS. When this reinforced door bar is equipped with a VdS recognised door
77
cylinder, the security card must be kept in a safe place (for making other door cylinders and
79 keys).
79
ABUS special accessories: Available from retailers.
81
PWA2700 – Wall strike plate if there is no installation space available for the normal lock case
85
PV1820 – Frame passage screw connection for the lock cases
PA1018 – Fixing set for doors that open outwards
89
DS10 – Spacer discs for cylinder protection (from a door panel thickness of 48 mm)
PSB2700 – T-catch set
External escutcheon PR2800
Cover for the hole in the wall PR2800
Underlay PR2800 for the lock body – Wooden board enabling improved assembly position
ASP17 – Mounting plate for lock casings
I. Package contents
Package contents of the PR2800 in a standard design (see Fig. 1)
Pos. Quantity
11 1 x
12 1 x
13 2 x
14 2 x
15 3 sets
16 2 x
17 2 x
18 1 x
19 4 x
10 4 x
11 4 x
12 4 x
13 8 x
14 8 x
15 4 x
16 4 x
17 1 x
18 1 x
for doors that open outwards as well as flush doors
Designation
Reinforced door bar PR2800
Cover for the lock body
End piece for the cover
Screw-on plate
Plastic underlay
Lock case
Protective cap for the lock case
Cylinder escutcheon for the outside
Bridging cartridge Ø 6 mm
Dowel Ø 6 mm
Dowel Ø 10 x 120 mm
Screw Ø 3.5 x 6.5 mm
Screw Ø 4 x 35 mm
Screw Ø 4.2 x 22 mm
Wooden screw Ø 7 x 60 mm
Hexagon socket head screw M8 x 60 mm
Cover for the hole in the wall
Door cylinder (optional)
GB
75