Package Contents - Abus PR2800 Montage- Und Bedienungsanleitung

Fitting and operating instructions
for the ABUS reinforced door bar PR2800
VdS recognition
The VdS recognition only applies in connection with the use of a VdS class A or a higher class
of door cylinder. The reinforced door bar PR2800 with VdS recognition is registered under the
number M 116306 VdS. When this reinforced door bar is equipped with a VdS recognised door
cylinder, the security card must be kept in a safe place (for making other door cylinders and
keys).
ABUS special accessories: Available from retailers.
PWA2700 - Wall strike plate if there is no installation space available for the normal lock case
PV1820 - Frame passage screw connection for the lock cases
PA1018 - Fixing set for doors that open outwards
DS10 - Spacer discs for cylinder protection (from a door panel thickness of 48 mm)
PSB2700 - T-catch set
External escutcheon PR2800
Underlay PR2800 for the lock body
Cover for the hole in the wall PR2800
I. Package contents
Package contents of the PR2800 in a standard design (see Fig. 1)
Pos. Designation
11 1 x Reinforced door bar PR2800
12 1 x Cover for the lock body
13 2 x End piece for the cover
14 2 x Screw-on plate
15 3 sets Plastic underlay
16 2 x Lock case
17 2 x Protective cap for the lock case
18 1 x Cylinder escutcheon for the outside
19 4 x Bridging cartridge Ø 6 mm
10 4 x Dowel Ø 6 mm
11 4 x Dowel Ø 10 x 120 mm
12 4 x Screw Ø 3.5 x 6.5 mm
13 8 x Screw Ø 4 x 35 mm
14 8 x Screw Ø 4.2 x 22 mm
15 4 x Wooden screw Ø 7 x 60 mm
16 4 x Hexagon socket head screw M8 x 60 mm
17 1 x Cover for the hole in the wall
18 1 x Door cylinder (optional)
GB
67