AFRISO Eurovac HV Betriebsanleitung Seite 89

5.6 Connecting the hoses
See chapter "Application example(s)" for an example of how to route the
hoses from the product to the tank to be monitored.
1. Use oil- and water-resistant plastic hoses 6 x 2 mm for the measuring
hose (red), the suction hose (transparent) and the exhaust hose (green).
- If the leak detector of existing systems is replaced, you may also use
4 x 2 mm provided such hoses had been used before the leak detector
is replaced.
- The hose connections of the product are designed for 4 x 2 mm and
6 x 2 mm hoses.
2. Install the hose with a steady gradient towards the tank, avoid bends.
- In the case of outdoor tanks, install the hoses with a gradient of 4 %.
If the hose does not have a steady gradient to the tank or if condensate can
collect in the line, use a condensate trap at every low point of the hose.
1. Do not install any shut-off fittings.
2. In outdoor or underground applications, install the hoses in suitable
shock-resistant and weather-resistant protective pipes.
3. Connect the measuring hose to the measurement connection of the tank.
Mounting
3. Push the antenna of the
EnOcean® wireless mod-
ule into the two housing
openings of the product.
4. Close the cover of the
product.
Eurovac HV
EN
31