AFRISO Eurovac HV Betriebsanleitung Seite 63

The permissible density of the liquid depends on the tank used and its con-
tent.
Tank as per
EN 12285-1
Class A
EN 12285-1,
DIN 6608,
EN 12285-2,
DIN 6616
DIN 6618-2
DIN 6619
DIN 6623,
DIN 6624
Any use other than the application explicitly permitted in these operating
instructions is not permitted and causes hazards.
Verify that the product is suitable for the application planned by you prior to
using the product. In doing so, take into account at least the following:
• All directives, standards and safety regulations applicable at the installa-
tion site of the product
• All conditions and data specified for the product
• The conditions of the planned application
In addition, perform a risk assessment in view of the planned application,
according to an approved risk assessment method, and implement the
appropriate safety measures, based on the results of the risk assessment.
Take into account the consequences of installing or integrating the product
into a system or a plant.
Information on safety
Hydrostatic height
≤ 3.0 m
≤ 3.0 m
≤ 2.5 m
≤ 2.0 m
≤ 1.6 m
≤ 15.95 m
≤ 12.75 m
≤ 9.585 m
≤ 2.84 m
≤ 2.76 m
≤ 2.6 m
≤ 1.9 m
≤ 1.2 m
Permissible density
of stored liquid
≤ 1100 kg/m³
≤ 1019 kg/m³
≤ 1223 kg/m³
≤ 1529 kg/m³
≤ 1900 kg/m³
≤ 1120 kg/m³
≤ 1470 kg/m³
≤ 1900 kg/m³
≤ 1060 kg/m³
≤ 1090 kg/m³
≤ 1160 kg/m³
≤ 1580 kg/m³
≤ 1900 kg/m³
Eurovac HV
EN
5