Olympus VN-741PC Bedienungsanleitung Seite 4

Turning the power ON (Fig. 2)
1 Slide the POWER switch to the
[ON] position.
Setting the time/date (Fig. 3)
1 Press the 9 or 0 button to
select the item to set.
2 Press the + or – button to change
the number.
• To change the setting of another
item, press the 9 or 0
button to move the blinking
cursor, then press the + or –
button to change the number.
3 Press the `OK button to finalize
the setting.
Selecting the mode (Fig. 4)
1 Press the + or – button to change
the mode.
[Normal Mode]:
This is the standard mode
in which all functions are
available.
[Simple Mode]:
This mode lists frequently
used functions. Displayed
text becomes larger for easier
viewing.
2 Press the `OK button to finalize
the setting.
Turning the power OFF
1 While the recorder is in stop mode,
slide the POWER switch to the
[OFF/HOLD] position.
Power Save mode
When the voice recorder has been
stopped for at least 5 minutes after
power ON, the display disappears
and the voice recorder automatically
enters the Power Save mode.
• Pressing any button releases the
Power Save mode.
EN
4
Recording
Basic recording procedure (Fig. 5)
1 Select the folder to save the
recording in.
2 Point the built-in microphone
in the direction of the sound to
record.
• When necessary, you can use
the voice recorder with the
stand extended as shown in the
figure (A).
3 Press the REC ( s) button to start
recording.
a Rec Mode
b Elapsed recording time
c Level meter (changes according
to recording volume and
recording function setting)
d Remaining possible recording
time
e Recording level
4 Press the STOP ( 4) button when
you want to stop recording.
f File length
Changing the recording scene
(Fig. 6)
The voice recorder has pre-registered
templates of optimum settings
tailored to various recording
applications such as conference
and dictation. When selecting one
of these templates you can enter
several settings recommended for
your recording application all in a
single operation.
1 Press the SCENE button while the
voice recorder is in stop mode.
2 Press the + or – button to select
the desired recording application.
3 Press the `OK button to finalize
the setting.
Playback
In addition to files recorded by the
voice recorder, you can also play files
in MP3 format transferred from a PC.
Basic playback procedure (Fig. 7)
1 Select the file to play from the
folder containing it.
2 Press the `OK button to start
playback.
aFile name and folder indicator
bElapsed playback time/File
length
c Playback position bar indicator
3 Press the + or – button to adjust
the volume to the desired level.
• The volume can be adjusted to
a setting between [00] to [30].
The higher the number, the
louder the volume.
• If the volume is set too loud, a
warning screen may appear.
4 Press the STOP ( 4) button to stop
playback.
Changing the playback speed
(Fig. 8)
1 Press the `OK button during
playback.
2 Press the + or – button.
• Adjust the playback speed.
3 Press the `OK button.
Fast playback restrictions
Depending on their sampling
frequency and bit rate, some files
may not play normally.
In this case, you will need to reduce
the playback speed.