Olympus VN-180 Gebrauchsanweisung
Digital voice recorder
Verwandte Anleitungen für Olympus VN-180
Inhaltszusammenfassung für Olympus VN-180
- Seite 1 DIGITAL VOICE RECORDER VN-180 VN-90 Instruction Mode d’emploi Gebrauchsanweizung Istruzioni Instrucciones Always do a test recording to avoid recording problems.
-
Seite 2: Inhaltsverzeichnis
CONTENTS BEFORE YOUR FIRST RECORDING ..........3 Parts Identification ................. 3 Liquid Crystal Display (LCD) ............4 Installing the Batteries ..............5 Clock Adjustment ................5 Changing the Batteries ..............6 BASIC OPERATIONS .............. 7 Recording (REC) ................7 Recording-Pause (REC PAUSE) ............ 8 Playback (PLAY) ................ -
Seite 3: Before Your First Recording
BEFORE YOUR FIRST RECORDING Parts Identification F G H 1 Liquid crystal display panel E Pocket Clip F Earphone jack (EAR) (LCD) 2 REC button G Microphone jack (MIC) 3 ERASE button H Built-in microphone 4 Fast Reverse ( ) button 5 MENU/FOLDER button 6 Speaker 7 Strap holes... -
Seite 4: Liquid Crystal Display (Lcd)
Liquid Crystal Display (LCD) 1 Current folder (A, B or S) 2 Voice-actuated recording indicator 3 Remaining battery power 4 Current message number, recording/playback/fast forward/fast reverse indicators 5 · Current date/time · Remaining memory (REMAIN) · Recording date/time (REC DATE) ·... -
Seite 5: Installing The Batteries
Installing the Batteries 1 Slide open the battery cover in the direction of arrow. 2 Insert two AAA (LR03 or R03) batteries according to the polarity ) indications and close the battery cover. 3 Time is displayed on the LCD and the voice recorder enters the clock adjustment mode. -
Seite 6: Changing The Batteries
Changing the Batteries Be sure to stop all operations before changing the batteries, and set the HOLD switch to ON, turning the recorder power off. 1 When the [ ] mark is shown on the LCD, you should replace the batteries with new AAA (LR03 or R03) batteries. -
Seite 7: Basic Operations
19. The recorder’s default setting is the SP mode (about 67 minutes of recording with the VN-180 or 33 minutes of recording with the VN-90). 3 Press the REC button. The red LED indicator lights and recording starts. -
Seite 8: Recording-Pause (Rec Pause)
Recording-Pause (REC PAUSE) 1 Press the REC button once during recording to enter the Recording-Pause mode. During recording-pause, [PAUSE] is shown on the LCD and the red LED indicator blinks. All recording will stop if the recorder is left in the Recording-Pause mode for 10 minutes or if the STOP button is pressed during the Recording-Pause mode. -
Seite 9: Playback-Pause (Pause)
Playback-Pause (PAUSE) 1 Press the PLAY button once during playback to enter the Playback-Pause mode. In the Playback-Pause mode, [PAUSE] blinks on the LCD. Playback will stop if the recorder is left in the Playback-Pause mode for 10 minutes or the STOP button is pressed during the Playback-Pause mode. -
Seite 10: Fast Forward/Fast Reverse
Fast Forward/Fast Reverse 1 Press and hold the Fast Forward ( ) or Fast Reverse ( button for more than 1 second in the Playback, Fast Playback or Playback-Pause mode. The message will be fast forwarded or reversed for as long as the button is pressed. When the end of message (with Fast Forward) or beginning of message (with Fast Reverse) is reached, the recorder pauses (for about 1/2 second), then starts Fast Forward or Fast Reverse... -
Seite 11: Erasing (Erase)
Erasing (ERASE) Erasing a single message (ERASE) 1 Press the ( ) or ( ) button in the Stop mode to select the message No. to be erased. 2 Press the ERASE button and release. The displayed message number blinks and the LCD shows [ERASE] and [YES] alternately. - Seite 12 When folder [S] is selected: • Erasing all messages for a selected date - When the ERASE button is pressed and held for more than 2 seconds, the LCD shows [ALL] together with alternately blinking date and [YES]. Press the ERASE button within 4 seconds again to erase all of the messages for the selected date.
-
Seite 13: Message Folder Management
MESSAGE FOLDER MANAGEMENT Types of Folders 1 The voice recorder has three folders, [A], [B] and [S]. Folders [A], [B] These folders are convenient for recording ordinary messages. Each folder can store up to 100 messages. Folder [S] This folder is convenient for schedule management. The folder can store up to 15 messages on a given date and 100 messages in the whole folder. -
Seite 14: Additional Features
ADDITIONAL FEATURES Schedule Recording 1 Press the MENU/FOLDER button for less than 1 second to select folder [S]. 2 Select the date for which you want to record a schedule by pressing the ( ) or ( button. 3 Press the REC button. The red LED indicator lights and recording starts. -
Seite 15: Message Alarm Playback
Message Alarm Playback Setting the message alarm 1 Select the message you want to play as an alarm by pressing the ) or ( ) button so that the message No. is displayed in the LCD. 2 Press and hold the MENU/ FOLDER button for more than 1 second. -
Seite 16: Schedule Alarm Playback
2 Press any button while the beep tones are being emitted to play back the message set for that time. Press the STOP button to stop message alarm playback. The electronic beep tones stop automatically if no button is pressed for 5 minutes after the beeping starts. The message is not played back in this case. -
Seite 17: Recording With Vcva (Variable Control Voice Actuator) (Vcva Rec)
Recording with VCVA (Variable Control Voice Actuator) (VCVA REC) 1 First press and hold the MENU/ FOLDER button for more than 1 second. Then after pressing the ) button twice to select the [VCVA] setting in the Options mode, press the MENU/FOLDER button again to enter the VCVA screen. -
Seite 18: Hold (Hold)
Hold (HOLD) 1 When the HOLD switch is set to [HOLD], the recorder is locked and all buttons are disabled. This helps to prevent accidental pressing of buttons that can activate undesired operations. It is recommended when carrying the recorder in a bag or your pocket. -
Seite 19: Entering Options Mode
) or ( button switches the recording modes: SP · SP: Standard Playback mode (recording time approx. 67 minutes with the VN-180 or 33 minutes with the VN-90) · LP: Long Playback mode (recording time approx. 180 minutes with the VN-180 or 90... -
Seite 20: Vcva Recording (Vcva Rec) Setting
2 Pressing the ( ) or ( ) button switches the microphone sensitivity: HI · HI: ..High sensitivity mode. Recommended for normal use. · LO: ..Low sensitivity mode. Use this setting when there is a lot of background noise. 3 Press the MENU/FOLDER button while the desired mode is displayed to complete its setting. -
Seite 21: Beep Tone (Beep) Setting
Beep Tone (BEEP) Setting 1 In the Options mode, display [BEEP] and press the MENU/ FOLDER button to start the beep tone setting. 2 Pressing the ( ) or ( button switched the beep tone between ON and OFF. When [BEEP] is set to [OFF], no beep tone will be produced when a button is pressed (the alarm tone will still be generated). -
Seite 22: Care In Handling
CARE IN HANDLING 1 Avoid subjecting the unit to direct sunlight, high humidity, strong magnetic fields. 2 If the unit is exposed to water (especially rain or condensation), wipe it off with a clean, dry cloth. Always avoid contact with salt components 3 Do not use alcohol, lacquer thinner or other organic compounds for cleaning. -
Seite 23: Battery Precautions
BATTERY PRECAUTIONS 1 Always use the batteries correctly. Fluid leakage, heat generation or explosion may occur if the batteries are used incorrectly. When the batteries are replaced, be sure the + and - polarity positions are correct. 2 Some batteries are of the same sizes but have different voltages. 3 Note the difference between dry type and rechargeable batteries. -
Seite 24: Troubleshooting
TROUBLESHOOTING Q1 Nothing happens when an operation button is pressed. A 1 · The unit may be set to the [HOLD] status. · The batteries may be depleted. · The batteries may be inserted incorrectly. · The battery cover may not be closed tightly. Q2 No sound is output. -
Seite 25: Specifications
SPECIFICATIONS Recording medium: Built-in flash memory Recording time: SP mode: ..Approx. 67 min. (VN-180)/33 min. (VN-90) LP mode: ..Approx. 180 min. (VN-180)/90 min. (VN-90) Speaker: ø 28 mm diameter dynamic internal speaker Maximum power: 120 mW Earphone jack: ø... - Seite 26 Please contact an Olympus service for further information. Olympus home page: http://www.olympus.com Customer support: USA: 1-800-622-6372 Europe: +800 67108300 USA RFI This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.