Usage; Intended Use; Installation; Installation Of Upper And Lower Bodies - Beko VRS 82736 VF Bedienungsanleitung

3

Usage

3.1 Intended use

This appliance is intended for domestic use. It is
not suitable for industrial use.

3.2 Installation

3.2.1 Installation of upper and
lower bodies
1. Fix the upper body onto the lower body.
2. Rotate the upper body connection screw
clockwise to fix it.
3.2.2 Installation of the lower
body and the brush
1. Attach the brush to the suction nozzle.
8 / 135 EN

3.3 Charging the appliance

1. Plug the adapter into the charging socket at the
back of the appliance and connect the plug to
the wall socket.
– The charging indicator will turn on and the
appliance will switch to the charging mode.
The charging indicator will flash.
– The charging indicator will remain on after
charging is complete.
C
Charging level will be displayed in %
on the indicator during charging.
C
It takes up to 8 hours for the
appliance to be fully charged.
WARNING: Appliance cannot
A
be operated during the charging
process.

3.4 Operating the appliance

1. Push the control button forward and move it to
the desired level to operate the appliance (see
3.4.1).
2. Pull back the control button and move it to
"OFF" level to switch off the appliance.
3.4.1 Adjusting the suction
power
You can adjust the suction power by using the
control panel (3) on the appliance.
1. Use the "ECO" level to clean curtains, table
cloths and sofas.
2. Use the "CARPET" level to clean carpets.
3. Use the "TURBO" level to clean hard floors.
Icon of the selected level will
C
be shown on the display during
operation.
Cordless Stick Vacuum Cleaner / User Manual