Benning CM 12 Bedienungsanleitung Seite 25

TRUE RMS digital current clamp multimeter for
- DC/ AC voltage measurements
- DC/ AC current measurements
- resistance measurements
- diode/ continuity tests
- capacity measurements
- frequency measurements
- effective power measurements
- power factor measurements (cos phi)
- phase sequence indication
Table of contents
1. User instructions
2. Safety instructions
3. Scope of delivery
4. Device description
5. General information of the digital current clamp multimeter
5.1 General information
5.2 AUTO SENSE mode
5.3 Key functions
5.4 Menu functions
5.5 Data logger function "LOG"
5.6 Memory function "MEM"
5.7 Data transmission to the smartphone/ tablet
6. Ambient conditions
7. Electrical specifications
8. Measuring with the BENNING CM 12
9. Maintenance
10. Technical data of measuring accessories
11. Environmental note
1. User instructions
This operating manual is intended for
- skilled electricians and
- electrotechnically trained personnel.
The BENNING CM 12 is intended for measurements under dry ambient condi-
tions. It must not be used in electrical circuits with a nominal voltage higher than
1000 V AC/ DC (see section 6 „Ambient conditions" for details).
The following symbols are used in this operating manual and on the
BENNING CM 12:
Application around and removal from HAZARDOUS LIVE conductors
is permitted.
Warning of electrical danger!

Indicates instructions which must be followed to avoid danger to per-
sons.
Attention! Must comply with documentation!

This symbol indicates that the information provided in the operating
manual must be complied with in order to avoid risks.
This symbol on the BENNING CM 12 indicates that the BENNING CM 12

is equipped with protective insulation (protection class II).
This symbol on the BENNING CM 12 means that the BENNING CM 12
complies with the EU directives.
This symbol appears on the display to indicate a discharged battery.
This symbol designates the „diode test" field.
This symbol designates the „continuity test" field.
The buzzer is intended for acoustic result output.
This symbol marks the range „capacity testing".
(DC) Direct voltage or current
08/ 2018
Operating manual
BENNING CM 12
BENNING CM 12

25