Mixcder E8 Bedienungsanleitung Seite 4

Note 2 : If ANC is on, the LED light would be solid green
when you charge the headphone.
Micro USB charging cable to the USB Interface for charging
5.Pairing with Wireless Devices
5-1 Pairing the headphones with a computer
Before pairing the headphone with your computer, please
make sure your computer or laptop has the built-in Wireless
feature. If not, you must purchase a Wireless dongle,
preferably version 2.1 or above.
1.Make sure the headphone is off.
2.Turn on wireless capability on the computer.
3.The "Search new device" screen will be displayed.
4.Do not place both devices more than 3 ft/1 m away from
each other.
5.Press and hold the power button on the headphone until
it powers on but don't let go just yet. Continue holding down
on the power button until you see the LED indicator flashes
blue and red alternately, which means your headphone is in
"pairing mode" waiting to be paired with your device. You
will hear a prompt.
6.As soon as the computer system detects the new device,
please select "Mixcder E8" to pair. Once successfully
paired, the LED turns to solid blue. You will hear a prompt.
active computer USB port
5V/1A USB charging adapter
EN-3