Abus RM40Li Bedienungs-, Installations- Und Wartungsanleitung Seite 33

Please note that in all other cases the muting only applies to the detector whose
test button has been pressed. The mute remains active until the alarm is automati-
cally reset. See the following table for differences in the signal when the detector
is muted.
Audible and visual signals
Mode
Standby
Testing
Smoke chamber
fault
Restforing the
factory settings
Fault in smoke
chamber
Indivisual operation
Alarm
Muting the detector –
Low battery
MoAnLtg_RM40Li_2015.indd 33
Audible Visual
LED flashes every
–
30 seconds
LED flashes twice
3 beeps 4 times
a second
Beeps once every LED flashes twice
30 seconds a second
Short beep LED flashes twice
Beeps once every LED flashes every
30 seconds 30 seconds
Beeps once LED flashes twice
a second a second
LED flashes once
a second
Beeps once every LED flashes every
30 seconds 30 seconds
– 33 –
Putting into operation
Notes
GB
Acoustically and
visually out of sync
Acoustically and
visually in sync
21.01.15 15:57