Abus RM40Li Bedienungs-, Installations- Und Wartungsanleitung Seite 31

This means that when a detector receives an alarm signal, it forwards the signal on
to the detectors it is connected to.
1. Press the test button on the detector for approx. 2 seconds, until the LED flashes
slowly, roughly once a second. The detector is now in addressing mode.
MoAnLtg_RM40Li_2015.indd 31
>50 cm
>50 cm
– 31 –
Putting into operation
GB
21.01.15 15:57