Replacing The Battery Of The Remote Control; Replacing The Rechargeable Battery - Philips FC8932 Bedienungsanleitung

Replacing dry wipes

Replacing the battery of the remote control

2
1
3

Replacing the rechargeable battery

2 Push the new side brushes onto the shafts.
You can order new dry wipes. They are part of replacement kit FC8068.
This replacement kit also contains two side brushes and two filters.
The remote control works on a CR2025 coin-shaped battery. Replace the
battery when the robot no longer responds when you press the buttons on
the remote control.
1 Hold the remote control upside down. Push the release button on the
battery holder and at the same time slide the battery holder out of the
remote control.
2 Remove the empty battery from the battery holder and place a new
battery in the battery holder. Then slide the battery holder back into the
remote control.
The rechargeable battery of the robot may only be replaced by qualified
service engineers. Take the robot to an authorized Philips service center to
have the battery replaced when you can no longer recharge it or when it
runs out of power quickly. You can find the contact details of the Philips
Consumer Care Center in your country in the international warranty leaflet.
English
23