Philips FC8932 Bedienungsanleitung Seite 21

2 Pull up the handle of the dust container lid and lift the dust container out
3 Carefully lift the lid off the dust container and take out the filter.
4 Shake the dust container over a dustbin to empty it. Clean the filter and
5 Put the filter back into the dust container. Then place the lid on the dust
6 Put the dust container back into the dust container compartment (1), fold
2
1
of the dust container compartment.
Note: When you remove or reinsert the dust container, take care not to
damage the blades of the fan.
the inside of the dust container with a cloth or a toothbrush with soft
bristles. Also clean the suction opening in the bottom of the dust
container.
Caution: Do not clean the dust container and the filter with water or in
the dishwasher.
container.
down the handle (2), and put the top cover back on the robot.
Caution: Always make sure the filter is present inside the dust
container. If you use the robot without the filter inside the dust
container, the fan will be damaged.
English
21