Synq DMC.2000 Bedienungsanleitung Seite 11

ENGLISH
SW/LED 20/20 G#1 5F
DATABASE SW/LED 21/21 A1 60
SW 22 61
SW 23 62
PITCH
Pitch Silder VR/CENTER 67
BEND/28
GAIN VR 11 50
HIGH VR/SW/CENTER/LED 12/24/29/24 C2 51/63/68
MID
VR/SW/CENTER/LED 13/25/2A/25 C#2 52/64/69
LOW VR/SW/CENTER/LED 14/26/2B/26 D2 53/65/6A
Channel Fader VR 10 4F
U1 LED 17 B0
U2 LED 1B D#1
16 LED 1C E1
10 LED 1E F#1
6 LED 22 A#1
LEVEL
LEVEL LED 1
METER LED
RANDOM SW/LED
MASTER
SW/LED
METER
MASTER VR
BOOTH VR
VR/SW/
Cross Fader
SW/CENTER
MIC1 LEVEL
VR
MIC2 LEVEL VR
CUE PAN
VR
SLIDER
CUE PAN
VR
LEVEL
Fader Start
SW
ON(L)
Fader Start
SW
OFF(L)
Fader Start
SW
ON(R)
Fader Start
SW
OFF(R)
C.F CURVE
SW
(L)
C.F CURVE
SW
(CENTER)
C.F CURVE
SW
(R)
CC-ABSOLUTE (VR, LEVEL METER LED) TYPE
Control Change messages are sent with status 0xBn, where n is the channel, for the specified CC
controller. Thus the controller MIDI ID is indicated with the channel along with the CC number. The value
from 0x00 to 0x7F, directly related to the location of the controller.
SYNQ 17/124
®
OPERATION MANUAL
20/20 G#1 5F
21/21 A1 60
22 61
23 62
PITCH
67
BEND/28
21 60
22/24/29/24 C2 61/63/68
23/25/2A/25 C#2 62/64/69
24/26/2B/26 D2 63/65/6A
20 5F
17 B0
1B D#1
1C E1
1E F#1
22 A#1
1
2C/2C G#2 6B
2D/2D A2 6C
31 70
32 71
30/08/
6F/47/48/49
09/0A
35 74
36 75
34 73
33 72
1 40
2 41
3 42
4 43
7 46
6 45
5 44
DMC2000
ENGLISH
7FH：ON ＊ LEVEL METER LEDS
00H：OFF
00~0B => ALL LEDS OFF
7FH：ON
0C~17=>LED(-30) ON
00H：OFF
18~23=>LED(-30, -20) ON
7FH：ON
24~2F=>LED(-30, -20, -10) ON
00H：OFF
30~3B=>LED(-30, -20, -10, -7) ON
7FH：ON
3C~47=>LED(-30, -20, -10, -7, -4) ON
00H：OFF
48~53=>LED(-30, -20, -10, -7, -4, -2) ON
7FH：ON
54~5F=>LED(-30, -20, -10, -7, -4, -2, 0) ON
00H：OFF
60~6B=>LED(-30, -20, -10, -7, -4, -2, 0, +2) ON
VR:00~7F
6C~77=>LED(-30, -20, -10, -7, -4, -2, 0, +2, +4) ON
VR:00~7F 78~7F=> ALL LEDS ON (-30, -20, -10, -7, -4, -2, 0, +2, +4, +7)
VR:00~7F
CC-RELATIVE (ENC) TYPE
VR:00~7F Control Change messages are status 0xBn, where n is the channel, for the specified CC controller. Thus
the controller MIDI ID is indicated with the channel along with the CC number. The value 0x40 is the
VR:00~7F
reference value of the controller. This is an offset to 0x40 "one's complement" notation.
7FH：ON
A message with data 0x43 indicates a positive change of 3.
00H：OFF
A messages with data 0x31 indicates a negative change of 15.
7FH：ON
00H：OFF
SWITCH ON/OFF (SW,CENTER)
7FH：ON
These messages are used for switches.
00H：OFF
Control Change messages are sent with status 0x9n, SWITCH On and Off value are 0x7F and 0x00,
7FH：ON
where n is the channel.
00H：OFF
7FH：ON
LED ON/OFF (LED)
00H：OFF
These messages are used for LED.
00H~7FH *
Control Change messages are sent with status 0x9n, LED On and Off value are 0x7F and 0x00, where n
7FH：ON
is the channel.
00H：OFF
7FH：ON
INSTALLING THE Q-DBASE SOFTWARE
00H：OFF
VR:00~7F
The DMC2000 works perfectly without the Q-DBASE database files but if you want to search your tracks
easily and lightning fast than you should install the Q-DBASE software on your computer! Please note that
VR:00~7F
the program currently only works under Windows (XP, Vista, Win7). To be sure that you always have the
VR:00~7F
latest version, you can download the software from our website (check
DMC2000 product page). Installing the program is very easy: just double-click the file and follow the
VR:00~7F
instructions on your screen.
VR:00~7F
USING THE Q-DBASE SOFTWARE
VR:00~7F
VR:00~7F
7FH：ON
00H：OFF
7FH：ON
After the installation you will see a new program directory called
00H：OFF
"SYNQ". In this directory you will find 2 files:
7FH：ON
- Uninstall (to uninstall the software)
00H：OFF
- Q-DBASE (to start the software)
7FH：ON
00H：OFF
7FH：ON  Connect your USB-hard drive to your PC and check which drive
00H：OFF
letter was assigned to it.
7FH：ON
 Click on the Q-DBASE icon to start the software: the main screen is
00H：OFF
shown.
7FH：ON
 In the upper left corner choose your USB-drive.
00H：OFF
 Press the BUILD-button on the right side.
 The software starts scanning the USB-drive for compatible
audio files and extracts the ID3-tags to build the Q-DBASE files, needed to speed up the search
function on player. Once the progression bar on the bottom is full, the database building process is
finished and a short summary is shown.
SYNQ
®
Each time you add or remove tracks from your USB hard disk,
you must run the Q-DBASE software again to update the database files!
18/124
OPERATION MANUAL
the download section on the
DMC2000