Synq DMC.2000 Bedienungsanleitung Seite 10

ENGLISH
8. SCROLL SPEED: you can select how fast the text scroll on the display.
 Turn the JOG WHEEL (22) to select the desired value: 50  2000ms (50ms=fast/2000ms=slow).
9. Sensitivity: you can change the sensitivity of the tactile jog wheel to optimize the jog wheel performance.
 Turn the JOG WHEEL (22) to select one of the 41 possibilities:
o ADJ. = 0: neutral setting (default setting, OK in most cases)
o ADJ. = -20: lowest sensitivity
o ADJ. = +20: highest sensitivity
A. INTENSITY: used to adapt the brightness of the VFD-display.
 Turn the JOG WHEEL (22) to select one of the 4 possibilities.
o ADJ. = 1  4: 1 = low brightness, 4 = high brightness (default)
B. A.CUE Level: the auto cue function detects where the music really starts, this avoids blanks when a track
is not well indexed. You can select one of eight detection level presets:
 Turn the JOG WHEEL (22) to select one of the 8 possibilities.
o ADJ. = -78dB  -36dB: the default setting = -48dB
C. Firmware version / upgrading: use this option to check and/or upgrade the firmware versions.
 Turn the TRACK knob (17) to select the 4 firmware parts:
o CON: xx: shows the version of the control firmware
o DSP: xx: shows the version of the DSP firmware
o Upgrade: blinks when the unit is ready to check if there are new firmware versions
available. See "FIRMWARE UPGRADING" for more information.
D. Load defaults: as you already noted this unit is highly configurable but that means also that you can
mess up a lot of settings as well. If you really messed up things, you can still reload the default setting!
 While "Enter Load" is blinking in the display: press the TRACK knob (17) to load the defaults.
E. Exit & Save: if you want your changes to the setup menu to be permanently saved (also after switching
the unit off) you MUST use this option!
 Press the TRACK knob (17) : the display shows "Saving" and exits the setup menu.
Note: alternatively you can also press the RECORD CUE-button (25) to save settings permanently.
FIRMWARE UPGRADING
We strongly suggest to register your player on our website (www.synq-audio.com/register/) so we can inform
you if new firmware updates are available. Upgrading firmware should always be done very carefully!
 Download the file containing the upgrade file(s)
 Read the instructions and follow them strictly, otherwise you could damage your equipment...
 Put the files on an EMPTY (important!) USB-stick.
 Press the LOAD TRACK button (19) for about 3seconds to enter the setup menu.
 Use the FOLDER knob (16) to browse to menu option "C. Version".
 Turn the TRACK knob (17) until the display shows "Upgrade".
 Use the SOURCE SELECT button (14) to select USB1 input (13).
 Insert the USB-stick with firmware files in USB1-input (13)
 Upgrading will start automatically: WAIT (!) until the upgrading process is finished. NEVER turn the
player off while upgrading the software!!!
 If the display asks you to turn off the unit: turn the unit off, wait 3seconds and turn it back on.
 Check if the software version corresponds to the version marked in the readme file that came with the
update.
MIDI MAP (default settings)
FUNCTION SHIFT
FUNCTION Type CODE NOTE (Hold
(DECK A) TAP)
SW/ENC 05/17 44/56
SW/ENC 01/16 40/55
IN SW/LED 02/02 D-1 41
OUT SW/LED 03/03 D#-1 42
SYNQ 15/124
®
OPERATION MANUAL
FUNCTION
FUNCTION SHIFT
CODE SHIFT
CODE NOTE (Hold NOTE
(CENTER (Hold TAP)
(DECK B) TAP)
DECK)
05/27 44/66
01/26 40/65
02/02 D-1 41
03/03 D#-1 42
DMC2000
ENGLISH
SOURCE
SELECT
RECORD CUE
1
1
2
2
3
3
4
4
DELETE CUE
LOAD TRACK
TIME X
ECHO
FLANGER
HOLD
FILTER
BRAKE
RATIO Y
%
A.Cue
scratch
VINYL
CDJ
Time
ACTION
SGL/CTN
7FH：ON
00H：OFF
7FH：ON
JOG
00H：OFF
7FH：ON
TAP/SHIFT
00H：OFF
7FH：ON
CUE
00H：OFF
SYNQ
®
SW/LED 04/04 E-1 43 04/04 E-1
SW 06 45 06
SW/LED 07/07 G-1 46 07/07 G-1
SW/LED
08/08 G#-1 47 08/08 G#-1
(RED)
SW/LED
08/05 F-1 47 08/05 F-1
(GREEN)
SW/LED
09/09 A-1 48 09/09 A-1
(RED)
SW/LED
09/06 F#-1 48 09/06 F#-1
(GREEN)
SW/LED
0A/0A A#-1 49 0A/0A A#-1
(RED)
SW/LED
0A/15 A0 49 0A/15 A0
(GREEN)
SW/LED
0B/0B B-1 4A 0B/0B B-1
(RED)
SW/LED
0B/16 A#0 4A 0B/16 A#0
(GREEN)
SW/LED 0C/0C C0 4B 0C/0C C0
SW/LED 0D/0D C#0 4C 0D/0D C#0
SW/LED 0E/0E D0 4D 0E/0E D0
SW/LED 0F/0F D#0 4E 0F/0F D#0
SW/LED 10/10 E0 4F 10/10 E0
SW/LED 11/11 F0 50 11/11 F0
SW/LED 12/12 F#0 51 12/12 F#0
SW/LED 13/13 G0 52 13/13 G0
SW/LED 14/14 G#0 53 14/14 G#0
SW 15 54 15
SW 16 55 16
SW 17 56 17
SW/LED 18/18 C1 57 18/18 C1
SW/LED 19/19 C#1 58 19/19 C#1
SW/LED 1A/1A D1 59 1A/1A D1
SW 1B 5A 1B
SW 1C 5B 1C
SW/LED 1D/1D F1 5C 1D/1D F1
SW/ENC 27/18 66/57 27/28
SW 1E 5D 1E
SW/LED 1F/1F G1 5E 1F/1F G1
16/124
OPERATION MANUAL
7FH：ON
43
00H：OFF
7FH：ON
45
00H：OFF
7FH：ON
46
00H：OFF
7FH：ON
47
00H：OFF
7FH：ON
47
00H：OFF
7FH：ON
48
00H：OFF
7FH：ON
48
00H：OFF
7FH：ON
49
00H：OFF
7FH：ON
49
00H：OFF
7FH：ON
4A
00H：OFF
7FH：ON
4A
00H：OFF
7FH：ON
4B
00H：OFF
7FH：ON
4C
00H：OFF
7FH：ON
4D
00H：OFF
7FH：ON
4E
00H：OFF
7FH：ON
4F
00H：OFF
7FH：ON
50
00H：OFF
7FH：ON
51
00H：OFF
7FH：ON
52
00H：OFF
7FH：ON
53
00H：OFF
7FH：ON
54
00H：OFF
7FH：ON
55
00H：OFF
7FH：ON
56
00H：OFF
7FH：ON
57
00H：OFF
7FH：ON
58
00H：OFF
7FH：ON
59
00H：OFF
7FH：ON
5A
00H：OFF
7FH：ON
5B
00H：OFF
7FH：ON
5C
00H：OFF
7FH：ON
66/67
00H：OFF
7FH：ON
5D
00H：OFF
7FH：ON
5E
00H：OFF
DMC2000