Electrolux WASL6E 201 Benutzerinformation Seite 10

10 electrolux
3. If it is necessary, set one or more func-
tions.
4. Touch and hold one of the buttons
for some seconds. The buzzer sounds
and the display shows that the pro-
gramme is saved. .
Set a memorised programme
1. Touch the button where you memo-
rised the programme you want to set.
2. The programme indicator comes on
and the display shows all the informa-
tion.
To cancel a memorised programme
you can only memorise a new pro-
gramme.
START/PAUSE BUTTON
Touch button 6 to start or interrupt a pro-
gramme.
DELAY START BUTTON
Touch button 7 to delay the start of a pro-
gramme from 30 minutes to 20 hours.
TIME SAVE BUTTON
Touch button 8 to decrease the pro-
gramme time.
You can select:
SHORTENED DURATION
To wash items with daily soil.
EXTRA QUICK
To wash quickly items with almost no soil.
Some programmes accept only one of
these functions.
EXTRA RINSE BUTTON
9
Touch button to add rinsing phases to a
programme.
Use this function for persons allergic to de-
tergents and in areas where the water is
soft.
STAINS, PREWASH AND SOAK
10
BUTTON
10
Touch button to set one of the these
functions:
STAINS
Use this function for laundry with hard
stains to remove.
5
6
7
8
9
When you set this function, put the stain re-
mover into compartment
The programme duration increases.
This function is not available with a
temperature lower than 40° C.
PREWASH
Use this function for heavy soil.
The appliance adds a prewash phase to the
main wash.
The programme duration increases.
SOAK
Use this function for heavy soil.
The appliance soaks the laundry at 30°C for
about half an hour before to wash.
11
SPIN BUTTON
11
Touch button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set pro-
gramme.
• Deactivate the spin phase (' No Spin '
function).
• Activate the ' Rinse Hold ' function.
Set this function to prevent fabric crea-
ses. The appliance does not drain the
water when the programme is comple-
ted.
TEMPERATURE BUTTON
12
Touch button to change the default
temperature.
Symbols - - - and
ACOUSTIC SIGNALS FUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You touch the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, touch button
same time for 6 seconds.
If you deactivate the acoustic signals,
they continue operate only when you
touch the buttons and when a malfunc-
tion occurs.
.
12
= cold water
10 9
and button at the