Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Never use a light socket.
Never connect the live (L) or neutral (N)
wires to the earth pin marked E or
For 115 V units with a power rating exceeding 1500 W,
we recommend to fit a plug to BS4343 standard.
Using an extension cable
If an extension cable is required, use an approved
extension cable suitable for the power input of this
tool (see technical data). The minimum conductor
size is 1.5 mm
2
.
When using a cable reel, always unwind the cable
completely.
Also refer to the table below.
Conductor size (mm
2
)
0.75
1.00
1.50
2.50
4.00
Voltage
Amperes
115
0 - 2.0
2.1 - 3.4
3.5 - 5.0
5.1 - 7.0
7.1 - 12.0
12.1 - 20.0
230
0 - 2.0
2.1 - 3.4
3.5 - 5.0
5.1 - 7.0
7.1 - 12.0
12.1 - 20.0
Cable rating (Amperes)
6
10
15
20
25
Cable length (m)
7.5
15
25
30
45
Cable rating (Amperes)
6
6
6
6
6
6
6
6
15
6
6
10
15
20
10
10
15
20
20
15
15
20
25
25
20
20
25
-
6
6
6
6
6
6
6
6
6
6
6
6
10
10
10
10
10
15
15
15
15
15
20
20
20
20
20
25
Assembly and adjustment
Fitting and removing a saw blade (fig. B)
The tool-free blade exchange system ensures quick
and easy changing of saw blades.
• Open the blade holder (7) by fully retracting the
blade latch (5).
• Insert the saw blade into the blade holder (7)
.
guiding the back of the blade into the groove of
the guide roller (8).
• Release the blade latch (5).
• To remove the saw blade, fully retract the blade
latch and pull the blade out of the holder.
Saw blades
Blade type
Fine-toothed cutting blade
Coarse-toothed cutting blade for fast straight cuts
Metal cutting blade
Flush cutting blade*
* Not available in all countries.
A wide variety of dedicated saw blades is available
as an option.
60
Setting the bevel angle (fig. C)
The adjustable shoe (9) allows cutting of LH and RH
6
10
bevel angles up to 45°. The bevel scale has preset
15
positions at 0°, 15°, 30° and 45°.
20
• Release the shoe lever (11).
25
• Slide the shoe (9) toward the saw blade.
-
• Tilt the shoe and set the desired bevel angle
-
-
using the scale.
6
6
• Tighten the shoe lever.
6
6
15
15
20
-
Prior to assembly and adjustment always
unplug the tool.
Applications
for smooth straight cuts
for ferrous and non-
ferrous metals
for finishing off cuts up to a
wall or edge.
Always select your saw blade with great
care.
E N G L I S H
25
Werbung
Inhaltsverzeichnis
