Environmental Protection - eta ANDARE ANIMAL Bedienungsanleitung

GB
Cleaning theTURBO nozzle (pic. 18)
Cut the threads and hairs with scissors. Turn on the vacuum cleaner. The cleaner vacuums
the cut hairs and threads. In case hairs or threads got tangled up around the attachment of
the brush cylinder and cannot be removed with the above-mentioned steps, it is necessary
to remove them with a suitable tool (e.g. tweezers). The front cover of the brush cylinder
can be removed for easier and more comfortable maintenance by releasing the arrest
latches on its sides and sliding it out. At the same time, make sure no dirt is stuck on the
inner side of the nozzle (i.e. turbine). Release the two arrest latches on the bottom side
of the nozzle in the direction of the arrow and remove the cover. Clean the space with
a suitable tool (e.g. tweezers). Insert the covers back into the nozzle reversely and close
it with by folding it up (you hear an audible click).
DermoPet cleaning
After each use make a visual control whether the brushes or combs do not have any
impurities. If you see any impurities, clean the nozzle or remove it, wash and degrease,
or disinfect with a disinfectant solution (eg Ajatin, Chloramine).
VI. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical
or electronic products must not be disposed of together with municipal waste. For proper
disposal of the product, hand it over at special collection places where it will be taken
over free of charge. Suitable disposal of the product can help to maintain valuable natural
resources and to prevent possible negative impacts on the environment and human health,
which could be the possible consequences of improper waste disposal. Ask for more
details at the local authorities or at a nearest collection site. Fines can be imposed for
improper disposal of this type of waste in agreement with the national regulations. If the
appliance is to be put out of operation, we recommend its cutoff after disconnecting it from
power supply and in this way it will not be possible to use the appliance again.
Replacement of parts that require intervention in the electric part of the appliance
must be carried out by a specialized service! Failure to comply with the instructions
of the manufacturer will lead to expiration of the right to guarantee repair!
27 / 53