Control Panel - Electrolux ERN29801 Benutzerinformation

20 electrolux
• Make sure that the mains plug is accessi-
ble after the installation of the appliance.
• Connect to potable water supply only.
Service
• Any electrical work required to do the
servicing of the appliance should be car-
ried out by a qualified electrician or com-
petent person.
• This product must be serviced by an au-
thorized Service Centre, and only genu-
ine spare parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer,

CONTROL PANEL

1 2
1 ON/OFF switch
2 Freezer temperature regulator
3 Fridge-Freezer temperature indication
button
1 Fridge compartment indicator
2 Freezer compartment indicator
3 Positive or negative temperature indica-
tor
4 Temperature indicator
5 Action Freeze function
6 Shopping function
7 Minidac function
8 Performance Optimization function
10) If a water connection is foreseen.
10)
˚C
3 4
4
5
6
Display
1 2 3 4
Switching on
After plugging the plug into the power out-
let, if the display is not illuminated, press
ON/OFF switch.
As soon as the appliance is turned on, the
following signals will appear on the control
panel:
• Positive or negative temperature indicator
• the temperature flashes, the background
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban
refuse and rubbish. The insulation foam
contains flammable gases: the appli-
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol
MODE
5
Display
Function button
Alarm reset switch
Fridge temperature regulator
5 8 7 6
will be positive, indicating that the tem-
perature is positive
of the display is red and you will hear a
buzzer.
are recyclable.
6