Operation - auna DiscoFever Bedienungsanleitung

POWER ON/OFF: To turn on the Karaoke Machine, press the POWER button once, the POWER indicator
will light up to full brightness and TFT. To turn off the system, press the POWER button again. The power
indicator and TFT screen will turn off.
MASTER VOLUME: Rotate to the MASTER VOLUME control to obtain the desired sound level.
SELECTING THE AUDIO SOURCE: Press FUNCTION button to toggle between CDG, USB, BT modes.
LIGHT EFFECT: Press LIGHT ON/OFF button once to switch on LED light effect. Press the button again to
switch off.
Open the CD door and place a disc in the CD compartment with the printed side facing down. Gently close
the CD Door.
Insert USB drives with MP3 files into the USB port..
The karaoke machine begins to read the disc/the USB drive. After that, the operation icon will appear on the
top of the TFT screen (if no disc is loaded, or the loaded disc is not readable, the display will say "NO DISC").
Press PLAY/PAUSE to play the inserted media. Use the NEXT/PREV and PAGE+/- buttons (when in stop
mode), to operate the playback.
REPEAT PLAY
During playback, press PROGRAM/REPEAT repeatedly to cycle through the play modes REPEAT 1 (repeat
current track) - REP FOLDER (for MP3 discs/drives with folders) - REP ALL - NO REP (repeat function off).
PROGRAMMING PLAYLISTS
This unit can be programmed to play up to 20 tracks/files. Stay in stop mode and
• press PROGRAM/REPEAT button once. "PRG SET 01:XX" will be shown on the screen.
• Use the SKIP buttons to select the desired track to be programmed. Press PROGRAM/REPEAT button
again to add the selected track/files to your playlist.
• Repeat this procedure to program up to 20 tracks/files.
• Press PLAY/PAUSE to play the programmed tracks. The "PROG" indicator will appear on screen during
the programmed playback.
• To clear program and resume normal playback, press the STOP button twice during playback, or open
the CD door to clear the programmed tracks.
16

Operation

CD/USB Operation
www.auna.de