auna DiscoFever Bedienungsanleitung Seite 15

In the most cases, you will have to select the respective input source of your TV/VCR to display the
signal from the karaoke machine on your TV screen.
Most TVs/VCRs have options like "Input Select", where you choose between cable, video1, video2 etc..
Sometimes, there are unoccupied channels before the lowest/highest channel on your TV.
Please consult your TV's/your VCR's user manual on how to select the correct video input source and
how to switch to it.
•
AUDIO CONNECTIONS
LINE OUT: Use RCA cables (red/white, supplied) to connect the Audio Out of your karaoke machine
with the Audio In or AUX In of your home stereo, a PA unit, or your TV/VCR:
LINE IN: Connect external audio devices to the Line In of your karaoke machine, using RCA or audio
cable. Make sure the volume of the used external player is turned up. Adjust the master volume with
your karaoke machine.
Please note: Whenever a Line In device is connected, the karaoke machine will automatically switch to
the line in mode. Disconnect to return to previous modes (CDG/USB/BT).
MICROPHONE: Plug a microphone into the MIC1 or MIC2 jack at the rear of your Karaoke Machine.
Microphone signals are mixed with playback from CD/CD+G. Located on the microphone, there is an
ON/OFF switch. Ensure you set the ON/OFF switch on the microphone to ON when required for use.
Please note: Please do not point the microphone head directly to the front of the speaker(s) on the
unit when you are singing, it would cause unwanted feedback sound that may affect the performance
of your unit.
15
www.auna.de