Troubleshooting - Klarstein 10030714 Anschluss- Und Anwendungshinweise

If your wine cooler appears not to be operating properly, before contacting the Customer Care
Department, please refer to the checklist below.
Problem
Appliance does not operate
Temperature inside the appliance is too
warm.
Temperature inside the appliance is too cold
Vibration
Moisture is forming on the inside of the ap-
pliance.
21

Troubleshooting

Possible Cause
Not plugged in.
The circuit breaker has tripped or the fuse has
blown.
The temperature controls are set too warm.
Set the temperature controls to a cooler set-
ting and allow several hours for the tempera-
ture to stabilise.
The door is being kept open too long or is be-
ing opened too frequently, which is allowing
warm air to enter the appliance.
The door is not closed completely.
The door gasket is not sealing correctly.
The appliance has recently been disconnect-
ed from the mains supply; it will take at least
four hours for it to get down to temperature
again.
The temperature controls are set too cold.
Set the temperature controls to a warmer
setting and allow several hours for the tem-
perature to stabilise.
Check to ensure that the appliance is on a
level surface.
The appliance is touching the back wall be-
hind it. Reposition the appliance and move
it from the wall.
If vibration continues to occur, then turn off
the appliance and unplug it from your mains
supply. Then contact the Customer Care De-
partment for assistance.
The door is slightly open.
The door is being kept open too long or is
being opened too frequently. Open the door
less often.
The door is not sealed properly.