Specifications - Makita 6207D Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Button
1-2. Battery cartridge
2-1. Switch trigger
3-1. Reversing switch lever
3-2. Clockwise
3-3. Counterclockwise
4-1. Speed change lever

SPECIFICATIONS

Model
Capacities
-1
No load speed (min )
Overall length
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
For Model 6207D
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model 6317D
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Explanation of general view
5-1. Lock button
5-2. Action mode change lever
6-1. Adjusting ring
6-2. Graduation
6-3. Pointer
7-1. Sleeve
7-2. Ring
Steel
Wood
Wood screw
Machine screw
High
Low
) : 70 dB(A) or less
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,D
2
) : 72 dB(A)
pA
6207D 6317D
10 mm
25.4 mm
6 mm x 75 mm
0 - 1,400
0 - 450
233 mm
1.8 kg 2.0 kg
D.C. 9.6 V D.C. 12 V
ENE034-1
Vibration
The vibration
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
ENG103-4
Uncertainty (K) : 1.5 m/s
For Model 6337D
Noise
The typical A-weighted noise level determined according
to EN60745:
ENG202-3
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
sum)
The noise level under working may exceed 80 dB(A)
Vibration
The vibration
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
ENG104-2
Uncertainty (K) : 1.5 m/s
3
8-1. Bit
8-2. Bit holder
10-1. Limit mark
11-1. Brush holder cap
11-2. Screwdriver
6337D
13 mm
32 mm
13 mm
241 mm
2.1 kg
D.C. 14.4 V
Wear ear protection.
total value (tri-axial
2
) : 2.5 m/s
h,D
2
) : 70 dB(A) or less
pA
Wear ear protection
total value (tri-axial
2
) : 2.5 m/s
h,D
2
6347D
38 mm
10 mm x 89 mm
0 - 1,600
0 - 500
2.3 kg
D.C. 18 V
ENG202-3
vector sum)
or less
ENG103-4
ENG202-3
vector sum)
or less