Specifications - Makita DBN500 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Battery indicator
3-1. Star marking
4-1. Indicator lamps
4-2. Check button
5-1. Trigger lock
5-2. Press to Lock position
5-3. Press to Free position
6-1. Mode selecting button
6-2. Sequential mode
6-3. Continuous mode
7-1. Adjuster
8-1. Lamp
8-2. Trigger
8-3. Driver guide (contact element)

SPECIFICATIONS

Brad nail magazine capacity
Dimensions (L x W x H)
Standard battery cartridges
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Wear safety glasses.
･
Do not use on scaffoldings, ladders.
･
Keep fingers away from trigger when
not driving fasteners to avoid accidental
firing.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Explanation of general view
9-1. Lock lever
9-2. Slide door
9-3. Driver guide
9-4. Magazine
10-1. Nails
10-2. Slide door
10-3. Driver guide
11-1. Nose adapter
11-2. Protrusion
11-3. Center plate
11-4. Holder
13-1. Groove
13-2. Hook
13-3. Screw
14-1. Hex wrench
15-1. Place the contact element against
workpiece
Model
Brad nail size
Rated voltage
Net weight
of the
18 Ga x 15, 20, 25, 30, 32, 35, 38, 40, 45, 50 mm
BL1815 / BL1815N / BL1820 /
END311-1
Intended use
The tool is intended for fastening on interior work and
furniture work.
Noise
The typical
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
European
The noise level under working may exceed 80 dB (A).
4
15-2. Pull the trigger
16-1. Pull the trigger
16-2. Place the contact element against
workpiece
17-1. Hex bolt A
17-2. Hex bolt B
17-3. Hex bolt C
17-4. Driver guide cover
18-1. Hex bolt
19-1. Pusher
19-2. Sleeve
19-3. Spring (large)
19-4. Spring (small)
19-5. Stopper
19-6. Slide door
DBN500
100 pcs
294 mm x 97 mm x 318 mm
D.C. 18 V
3.3 kg
BL1830 / BL1840 / BL1840B /
BL1820B
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately and
environmentally compatible recycling
facility.
A-weighted noise
pA
Wear ear protection
3.5 kg
BL1850 / BL1850B
returned to
ENE073-1
ENG905-1
level determined
) : 79 dB (A)
an