Switching Off; Temperature Regulation; Eco Mode; Fastfreeze Function - Electrolux SG198 Benutzerinformation

42 www.electrolux.com

3.2 Switching off

1. To switch off the appliance press the
temperature key for 3 seconds.
All LED indicators turn off.
2. To disconnect the appliance from the
electrical supply, remove the mains
plug from the power socket.

3.3 Temperature regulation

To regulate the temperature, press the
temperature key. Every time the key is
pressed, the set temperature moves by 1
position and corresponding LED indicator
lights up. Press the temperature key
repeatedly until the required temperature
is selected. The setting will be fixed.
Selection is progressive,
varying from -15°C to -24°C.
Coldest setting: -24°C.
Warmest setting: -15°C
Most suitable setting: ECO
mode (-18°C).
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
• room temperature
• frequency of opening the door
• quantity of food stored
• appliance location.
3.4 Sleep mode of the display
After 30 seconds of no interaction with
the appliance, the display goes into the
sleep mode. Only LED indicator
corresponding to currently set
temperature illuminates in low light. All
other LED indicators are off. To
deactivate this mode press the
temperature key.

3.5 ECO mode

In this mode the temperature is set to
-18°C.
This is the best temperature
to ensure good food
preservation with minimal
energy consumption.
To activate ECO mode press the
temperature key repeatedly until LED
indicator next to ECO mode icon lights
up.

3.6 FastFreeze function

If you need to rapidly decrease the
temperature in the freezer compartment
to freeze fresh food quickly, we suggest
activating FastFreeze function for proper
food storage.
To activate this function press the
temperature key repeatedly until the LED
indicator next to FastFreeze icon lights
up. Also LED indicator corresponding to
-24°C illuminates.
This function stops
automatically after 52 hours.
When the function
deactivates, the previous
temperature setting is
restored.
You can deactivate this
function at any time by
pressing the temperature
key and choosing a new
temperature setting.

3.7 High temperature alarm

An increase in the temperature in the
appliance (for example due to an earlier
power failure or opening of the door)
activates the high temperature alarm.
The LED indicator of the currently set
temperature flashes and the sound is on.
When normal conditions are
restored, the high
temperature alarm
deactivates. You can switch
off this alarm by pressing the
temperature key.