Switching Off; Temperature Regulation; Fastfreeze Function - Electrolux EK282SARWE Benutzerinformation

Fridge Temperature colder button
7
ON/OFF
8
It is possible to change predefined sound
of buttons by pressing together Mode
4.1 Display
A B C
min
J I
4.2 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off. The temperature
indicators show the set default
temperature.
To select a different set temperature
refer to "Temperature regulation".
If "dEMo" appears on the display, refer to
"Troubleshooting" .

4.3 Switching off

1. Press the appliance ON/OFF for 3
seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.

4.4 Temperature regulation

Set the temperature of the appliance by
pressing the temperature regulators.
Default recommended set temperature
is:
• +4°C for the fridge
• -18°C for the freezer
The temperature range may vary
between -16°C and -22°C for freezer and
between 2°C and 8°C for fridge.
The temperature indicators show the set
temperature.
D E
H G F
and temperature colder button for a few
seconds. Change is reversible.
A. Fridge compartment indicator
B. Timer indicator
/Temperature indicator
C. FastCool function
D. FastFreeze function
E. Temperature indicator
F. Freezer compartment indicator
G. Alarm indicator
H. ChildLock function
I. DrinksChill function
J. DYNAMICAIR function
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
4.5 FastCool function
If you need to insert in the fridge
compartment a large amount of warm
food, for example after doing the grocery
shopping, we suggest activating the
FastCool function to chill the products
more rapidly and to avoid warming the
other food which is already in the
refrigerator.
1. Press the Mode until the
corresponding icon appears.
The FastCool indicator flashes.
2. Press the OK to confirm.
The FastCool indicator is shown. The fan
activates automatically for the function
duration.
This function stops automatically after
approximately 6 hours.
You can deactivate the FastCool function
before its automatic end by repeating the
procedure or by selecting a different
fridge set temperature.

4.6 FastFreeze function

The FastFreeze is used to perform pre-
freezing and fast freezing in sequence of
Freezer compartment. This function
ENGLISH 9