Makita 5603R Bedienungsanleitung Seite 4

Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : cutting chipboard
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model 5903R
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745-2-5:
Work mode : cutting chipboard
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model 5103R
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : cutting chipboard
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model 5143R
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
) : 95 dB(A)
pA
) : 106 dB(A)
WA
value (tri-axial vector
2
) : 3.0 m/s
h
2
) : 97 dB(A)
pA
) : 108 dB(A)
WA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
) : 94 dB(A)
pA
) : 105 dB(A)
WA
Vibration
The vibration
ENG214-2
determined according to EN60745:
sum) Work mode : cutting chipboard
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
ENG102-2
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
ENG213-1
operator that are based on an estimation of
exposure in the actual conditions of use (taking
sum)
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
ENG102-2
machine(s):
Designation of Machine:
Circular Saw
Model No./ Type:
5603R,5703R,5705R,5903R,5103R,5143R
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
ENG214-2
And are manufactured in accordance with the following
sum)
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
ENG102-2
000230
4
total value (tri-axial
2
) : 2.5 m/s
h
2
Corporation as the
30th January 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
ENG214-2
vector sum)
or less
ENG901-1
ENH101-12
responsible