Master/Slave Operation; Remote Control Operation - Lightmaxx Vega PAR FX II Bedienungsanleitung

CH 21 0-9
10-59
60-109
110-159
160-209
210-255
CH 22 0-255
CH 23 0-255
CH 24 0-255
Static, show or sound mode:
The device contains static programs (Stat) as well as automatic programs that run according
to fi xed patterns (Show). In addition, effect sequences can be called up to match the music
via the built-in microphone (sound). The selection of the respective mode is made via the
menu directly on the device.

Master/Slave Operation:

If you connect several devices of the same type via DMX, they can be controlled simulta-
neously via the master device. To do this, set the desired function on the fi rst device in the
chain; the other devices in the series must now be set as „slaves". Now the fi rst device in the
chain gives the function to all other devices and all devices run simultaneously.
No Function
Program1 (RGBW+SMD)
Program2 (RGBW+SMD)
Program3 (RGBW)
Program4 (SMD)
Sound 2 Light
Program Speed (slow to fast)
Macros
Speed Macros (slow to fast)

Remote Control Operation:

The unit can be remote controlled using the remote control
included in the delivery. The respective functions can be per-
formed using the various program selection or colour keys.
21