Operation - Lightmaxx Vega PAR FX II Bedienungsanleitung

Installation:
Always check the device for damage before use. Use the original packaging or suitable transport
or storage packaging to protect the product optimally from harmful substances such as dust or
moisture, etc. when not in use.
The device can be installed either upright or suspended. The mounting must always be made on a
stable, approved support or an appropriate surface. Use the opening in the mounting bracket to
attach the unit. Always create a second, independent safeguard for the device, e.g. by means of a
safety cable.
All work on the device (e.g. installation) should always be carried out from a stable and approved
platform. Make sure that the area below you is closed off.
Please note that the use of this device with a dimmer is not possible!

Operation:

All connections of the device should be made before switching on. Use only high-quality
cables that are as short as possible for the connections.
18
Warning! (Risk of injury from falling)
It must be ensured that the device complies with all legal standards and
regulations in the respective country of use. Ensure that the device is
always secured by a second mounting cable (e.g. Safety).
Warning! (Overheating)
The maximum permissible ambient temperature of this device is 40° C.
Ensure that the unit is always adequately ventilated.
Warning! (Using Stands)
As soon as the device is mounted on a stand, a safe and fi rm base must
always be ensured. Ensure that the maximum permissible load capacity of
your tripod is not exceeded.
Warning! (Fault during data transmission)
Never connect the DMX input or output to audio devices such as power
amplifi ers or mixing consoles!
DMX cables enable interference-free operation and the highest possible
transmission reliability of signal data. Do not use microphone cables.