Specifications - Makita HR2470 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Switch trigger
1-2. Lock button
2-1. Lamp
3-1. Reversing switch lever
4-1. Quick change chuck for SDS-plus
4-2. Change cover line
4-3. Change cover
5-1. Spindle
5-2. Quick change drill chuck
5-3. Change cover line
5-4. Change cover
6-1. Lock button
6-2. Action mode changing knob
7-1. Rotation only
8-1. Hammering only

SPECIFICATIONS

Concrete
Capacities
No load speed (min
Blows per minute
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood, metal,
ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Explanation of general view
9-1. Grip base
9-2. Side grip
9-3. Loosen
9-4. Tighten
9-5. Teeth
9-6. Protrusion
10-1. Bit shank
10-2. Bit grease
11-1. Bit
11-2. Chuck cover
12-1. Bit
12-2. Chuck cover
13-1. Lock button
13-2. Action mode changing knob
15-1. Depth gauge
Model
Tungsten-carbide tipped bit
Core bit
Diamond core bit (dry type)
Steel
Wood
-1
)
Overall length
Net weight
Safety class
) : 90 dB(A)
pA
) : 101 dB(A)
WA
HR2470/HR2470F
370 mm
2.9 kg
ENE043-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
ENF002-2
Work mode : chiselling
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : hammer drilling into concrete
Vibration emission (a
ENG905-1
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
4
16-1. Dust cup
18-1. Blow-out bulb
20-1. Chuck adapter
20-2. Keyless drill chuck
21-1. Quick change chuck for SDS-plus
21-2. Change cover line
21-3. Change cover
22-1. Spindle
22-2. Quick change drill chuck
22-3. Change cover line
22-4. Change cover
23-1. Sleeve
23-2. Ring
23-3. Quick change drill chuck
HR2470T/HR2470FT
24 mm
54 mm
65 mm
13 mm
32 mm
0 - 1,100
0 - 4,500
394 mm
3.0 kg
/II
Wear ear protection
) : 12.5 m/s
h,CHeq
2
) : 15.5 m/s
h,HD
2
2
) : 4.5 m/s
h,D
2
ENG900-1
2
2