Cocraft LC50-SP Bedienungsanleitung Seite 5

Manual levelling
In manual levelling mode, the self-levelling mechanism is disengaged so that you can
place the laser level at any angle you like.
1. Place the laser level on a firm, flat and vibration-free surface. The laser can also be
stood on its folding metal legs or fastened to a tripod using the ¼" tripod adaptor.
2. Activate the manual levelling mode by pressing [
be set to OFF in order for the manual levelling mode to be activated.
3. Press [ ] (8) repeatedly to select the type of laser line: Cross, horizontal or vertical.
4. Use the adjustable metal legs to stand the laser level at the desired angle.
5. Press [ ] to deactivate the manual levelling mode.
Note: Always switch the laser off after you have finished levelling or when moving to
a different location. When the laser level is switched off, a built-in lock mechanism is
engaged to protect the levelling mechanism.
Pulse mode
The pulse mode is for use outdoors together with a laser receiver (Clas Ohlson art.no:
40-9978).
] (7). The power switch must
5