roco multiMAUS Handbuch Seite 40

calling up other locomotives already entered in the library ("scrolling")
Locomotives in the library are sorted in the order in which they were entered. You can of
course change this order:
Select locomotive
These key combinations (press keys together) move the locomotive up or down in the library.
You can check the new order for the library with the arrow keys.
Entering a new locomotive (in the example, the DR 120 series "Taigatrommel" diesel locomotive):
Input
/
...
...
40
40
8051281925.indd 40
/
Display message
+
or
Comment
You can find the free memory slot marked
"NEW ?" by scrolling through the library using
the arrow keys.
Confirm by pressing "OK".
You then enter the locomotive name. 5 char-
acters are available. In our example we have
abbreviated "Taigatrommel" to "TAIGA".
The first character is displayed with a flashing
cursor.
You use the "function keys" 1 – 0 to make the
input in the same way as writing a text mes-
sage on a mobile phone: Press the respective
key repeatedly until the desired character ap-
pears. The cursor flashes and freezes briefly
after the correct character has been entered
before jumping to the next character place.
To enter a space, press the "0" key once, to get
the "0", press the key twice. Special characters
(/, –, \, *, [ , ], ‹, ›) can be entered by repeatedly
pressing the "1" key. Correct input errors by us-
ing the left "arrow key" to move back one or
more spaces.
Confirm by pressing "OK"
The multiMAUS then switches to the locomo-
tive address. The "suggested value" is dis-
played, in this case "3".
+
10.05.2016 12:52:16