Care And Cleaning - Klarstein 10032081 Bedienungsanleitung

EN
14
Install and Uninstall the skirt
Hold and press the clamp, align the unlocking
symbol and the arrow, rotate the skirt in
clockwise direction until you can see the
arrow and locking symbol are in the same
horizontal position. Note: Be cautious
with the stainless steel propeller when it
crosses over the hole of the stainless steel
skirt.
Hold and press the clamp,rotate the skirt in
anticlockwise direction to take off the skirt.
Note: Be cautious with the stainless steel
propeller in case it hits the stainless steel
skirt.

CARE AND CLEANING

Note: Always turn off and unplug the unit.
• Internal service work must be performed by certified personnel only.
• Make sure system is at room temperature.
• Check for signs of damage including pulled cord or physical damage to system or
heaters. Refer all servicing to qualified personnel.
Maintenance skirt and pump
Turn the pump cap out of the lock position then pull off.
The skirt and pump cap can be placed into the dishwasher.
For cleaning the heating coil, pump shaft, and sensors,
use dish soap, a soft tooth brush and rinse under water.
Note: Do not rinse the top part of the circulator including the main body in water.