Care - Panasonic ER-GP80 Bedienungsanleitung

Care

Removing and mounting the blade
• Be sure to turn off the power before you remove the blade.
Removing the blade
Hold the clipper with the switch
facing upward and push the
blade with your thumb while
catching the blade in your other
hand.
Mounting the blade
1. Set the dial to "2.0".
2. Fit the mounting hook into the blade
mounting on the clipper and push in
until it clicks.
Cleaning
Clean the clipper and the blade after each use.
1. Brush off any hairs from the
clipper and from around the
blade.
2. Brush off the hairs from the
blade edge.
2.0
2.0
3. Brush the hairs out from
between the stationary blade
and the moving blade while
pressing down on the cleaning
lever to raise the moving
blade.
11