Security Code; Touch Sensor Tone; Manual Clock Adjustment - Kenwood KRC-591 Bedienungsanleitung

Menu system

Security Code

Because authorization by the Security Code is required when it's
removed from the vehicle, personalizing this unit is by using the
Security Code is a help in preventing theft.
When the Security Code function is activated it can't be released.
Note, your Security Code is the 4 digit number entered in your "Car
Audio Passport" in this package.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security"/ "SECURITY" is displayed.
3
Enter Security Code mode
Press the [4] or [¢] button for at least 1 second.
When "ENTER" is displayed, "CODE" is displayed.
4
Select the digits to enter
Press the [4] or [¢] button.
5
Select the Security Code numbers
Press the [FM] or [AM] button.
6
Repeat steps 4 and 5, and complete the Security Code.
7
Confirm the Security Code
Press the [¢] button for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is displayed.
8
Do the step 4 through 7 step operation, and reenter the
security code.
"APPROVED" is displayed.
The Security Code function activates.
If you enter a Code different from your Security Code, you have to
start over from step 4.
Press the Reset button and when it's removed from the
battery power source
1
Turn the power ON.
2
Do the step 4 through 7 step operation, and reenter the
security code.
"APPROVED" is displayed.
The unit can be used.
If an incorrect code is input, "WAITING" is displayed, and the input
prohibited time shown below is generated.
After the input prohibited time lapses, "CODE" is displayed, and
input can be done.
Number of times
the incorrect code was input
1
2
3
4

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.
Display
"Beep ON"/"BEEP ON"
"Beep OFF"/"BEEP OFF"

Manual Clock Adjustment

This adjustment can be done when the <Synchronize Clock> (page
21) is set as OFF.
1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "CLK ADJ" display.
— 20 —
Input prohibited time
—
5 minutes
1 hour
24 hours
Setting
Beep is heard.
Beep canceled.