Hammering The Wall Plugs; Installing The Hanger Screws - Beko HCA63640B Bedienungsanleitung

3
Installing your appliance

3.2.2 Hammering the wall plugs

Hammer Ø 10 mm wall plugs (X,Y) into the holes
drilled for hanger screws. Hammer 2 x Ø 6 mm
wall plugs (Z) into the holes drilled with a Ø6
mm bit for the external flue connection plate.
(Figure 5)
3.2.3 Installing the hanger
screws
Install 5.5x60 hanger screws into the Ø 10 mm
wall plugs (Y) you have hammered into the wall.
There must be a gap of 5 mm between the screw
head and the wall. (Figure 5)
Connect the internal flue connection plate to the
6 mm wall plugs (Z) on the wall using Ø 3.9x22
screws. (Figure 5)
5.5 x 60 Cross- 3.9 x 22 Cross-head
head screw screw
(Figure 5)
3.2.4 Hanging the hood onto the
wall
• Hang the hood onto the screws you have in-
stalled into the Y holes.
• Open the side suction window of the hood by
pulling it towards yourself. Install the 5.5x60
screws through the X holes located inside in
order to secure the appliance.
Hood / User Manual
Z
Z
Y
X Y
X
27 / EN