Tare; Hold Function - PCE Instruments DHS15K Benutzerhandbuch

If weight is over 100%F.S., or less than 0, tare is not allowed.
If weight is not stable, tare is not allowed.
Tare will reduce the apparent overloading range of the scale. If
weight is added, it will be shown on the display. When the
container is removed, the negative weight is displayed. If the
container was full, the displayed value will be the sum of the
weight of the container and the all the articles inside it. The zero
scale indicator on the display will turn on since the hook is empty.
Press again TARE/ZERO to clear the tare.
After clearing it will be possible to carry out a new tare if a new
article needs to be added on the scale.
Press TARE/ZERO at length to clear the display.

5.6 HOLD FUNCTION

Press HOLD/UNIT, to lock the weight reading:
Restore the tare.
TARE is hidden. Weight reading
returns to that in gross mode.
The HOLD indicator on the display
turns on, the weight is locked.
12