Start-Up; Instructions For Use - Pce Instruments Dhs15K Benutzerhandbuch

5.2 START-UP

Press key for 1 second.
The scale boots up, self-tests, battery tests and initializes.

5.3 INSTRUCTIONS FOR USE

The scale must be hanged in a secure and stable way, for
example with a wire rope.
Place container or pan on the hook before you turn the scale on.
Always put a load on the scale gently. Shocks or access force
may damage the weight sensor.
It is suggested to remove the load from the hook immediately
after the weigh, it will prolong the lifetime of the weight sensor.
5.4 SCALE ZERO
If power-on test is failed, error
message will display.
The screen shows detection
message while scale detects its
load and auto-zero itself.
Waits for load.
Press TARE/ZERO at length:
10