Herunterladen Inhalt Inhalt Diese Seite drucken

Hitachi CG 36DL Bedienungsanleitung Seite 24

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 25
English
Symptom
Tool
Strong vibrations.
The brake fails to
engage 1-3 seconds
after the lever is
released.
GUARANTEE
We guarantee Hitachi Power Tools in accordance with
statutory/country specifi c regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or normal
wear and tear. In case of complaint, please send the Power
Tool, undismantled, with the GUARANTEE CERTIFICATE
found at the end of this Handling instruction, to a Hitachi
Authorized Service Center.
NOTE
Due to HITACHI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
Information concerning airborne noise and vibration
The measured values were determined according to
IEC60335 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 85 dB (A).
Measured A-weighted sound pressure level: 76 dB (A).
Uncertainty KpA: 3 dB (A).
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to IEC60335.
a
Vibration emission value
The declared vibration total value has been measured in
accordance with a standard test method and may be used
for comparing one tool with another.
It may also be used in a preliminary assessment of exposure.
WARNING
◯ The vibration emission during actual use of the power
tool can diff er from the declared total value depending on
the ways in which the tool is used.
◯ Identify safety measures to protect the operator that
are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle in addition to the
trigger time).
24
Possible cause
The loop handle is not properly attached
to the main pipe.
The cover is not been properly attached
to the main pipe.
This may be due to a malfunction of the
tool.
h. w = 4 m/s
2
Remedy
Secure properly.
Secure properly.
Contact the store where you purchased
the tool or your nearest Hitachi
Authorized Service Center.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Cg 36dllCg 36dalCg 36dall

Inhaltsverzeichnis