Assembly Before Initial Start Up - HEYLO KT 1800 Bedienungsanleitung

Dehumidifier
KT 1800

4. Assembly before initial start up

Fitting the handle
1. Remove both screws, right and left on the body (A).
2. Unscrew the enclosed handle (B).
3. Fasten the handle in an upright position with the screws (A)
A
Changing the language in the display
The standard language is English. Follow these steps to change to another language:
1. Pull out the plug from the mains.
2. Keep the DISPLAY button (2) pressed down while connecting the device to the
mains power supply. The display now shows "ENGLISH".
3. Press the DISPLAY button or the DELETE button to change the display to
FRENCH, GERMAN or SPANISH.
4. Next, unplug the device from the mains again. The selected language will then
be saved.
CAUTION: DO NOT use any other buttons! By pressing other buttons while
changing the language mode, it is possible that the operating
parameters of the device could change.
24
B
EN