Operating Parameters - Palazzetti EASY TOUCH Verwendung Und Betrieb

6.3 OPERATING PARAMETERS

Stove operation is determined by the Power level, Fan and Temperature parameters set by the user.
6.3.1
The power level de nes the amount of heat produced by the stove and consequently directly affects fuel
consumption.
To change the power level:
a) Use the
b) The power level value will ash; set the value using the
c) Press to con rm the settings.
6.3.2
To modify the fan speed:
a) Use the
b) The fan speed value will blink; modify the value by pressing
"OFF" = the fan is completely excluded, and the stove will work with natural convection only (only on
models where featured and when the power of the stove is less than the value of 4);
"1" minimun,..., "5" maximum;
"Auto" = automatic functioning (the stove will set automatically the fan speed and the stove power
according to the room temperature);
"Hi" = ultrarapid functioning (to use only in the case you need to quickly heat the room);
c) press the button
6.3.3
Setting this value de nes the desired room temperature, read directly by a probe tted on the stove.
To set the desired temperature:
a) Use the
b) The current value will ash; change it using the
c) Press to con rm the settings.
16
buttons to go to the power menu
buttons to go to the fan menu
to con rm the data you set.
buttons to go to the temperature menu
and press ;
(buttons (1 minimum,....5 maximum)
and press ;
;
and press ;
buttons