Assembling The Vacuum Cleaner - Rotel U6711CH Gebrauchsanweisung

 ASSEMBLING THE VACUUM CLEANER
o
Ensure the the vacuum is switched off and disconnected from the mains supply be-
fore assembling.
o
Insert the hose connector onto the socket on the main body of the cleaner until it
clicks into position.
o
Insert the suction tube into the floor head.
o
Fit the other end of the telescopic suction tube into the handle.
o
Unwind the mains cable and plug it into a socket. Never pull the cable further than
the yellow mark.
o
Press the ON/OFF switch to start vacuuming.
o
Adjust the power regulation knob to suit the type of flooring being cleaned.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
28