Turning the alarms on or off
When the clock time is displayed, press and hold the ALARM 1 or ALARM 2
button to enable or disable the respective alarm. The corresponding Alarm 1 or
Alarm 2 indicator (alarm or radio) will switch on when the alarm is enabled.
Deactivating a sounding alarm
•
Press any ALARM OFF button to switch off a sounding alarm.
•
When the alarm sounds, the corresponding Alarm 1 or Alarm 2 indicator
(alarm or radio) flashes on the display.
Snooze
•
To temporarily silence a sounding alarm, press the SNOOZE button. The
alarm will sound again when the snooze period (9 minutes) is over.
•
The corresponding Alarm 1 or Alarm 2 indicator (alarm or radio) flashes on
the display during the snooze period.
•
To cancel the snooze period and the alarm, press any ALARM OFF.
Sleep
•
This sleep function defines the duration of time before the radio switches
itself off automatically.
•
When the radio is switched on, press the SLEEP button repeatedly to select
a sleep period (Options: Off, 10, 20, 30, 40, 50, 60, 70, 80 and 90
minutes).
•
The radio will automatically switch off when the sleep period is over.
•
Press the SLEEP button to check the remaining time before the radio
switches off.
•
Press the POWER button to cancel this function.
Display information
•
In standby mode, press the Y-M-D button repeatedly to change showing
the year, date, time and day of the week (d1 = Monday, d2 = Tuesday, d3
= Wednesday, d4 = Thursday, d5 = Friday, d6 = Saturday and d7 =
Sunday).
•
In radio mode, press the BACKWARD or FORWARD button once to briefly
change the display from the clock time to the current radio frequency.
Display brightness
•
In standby mode, press the DIMMER button to change the brightness level
of the display (low, high or off).
Projector
•
Press the PROJECTOR button to project the current clock time on a wall.
•
Rotate the projector (up to 180°) to adjust the projection angle.
•
Press the 180° FLIP button to flip the projected image.
17