TIME AND CALENDAR MANUAL SETTING
Setting Time and Calendar
Press Clock ADJ. (13) button in standby mode and keep depress over 2
seconds to enter time set mode, after enter the setting mode, press Clock ADJ.
button (13) to change the mode cycle as follows :
Normal → Year → Month → Day → 12/24 H format → Real time Hour → Real
Action (during data adjustment):
-
Press
/ Tune - button (3) to adjust data backward.
-
Press
/ Tune + button (5) to adjust data forward.
-
Keep depressed
-
Use Clock ADJ. (13) button to confirm each setting.
DAYLIGHT SAVING TIME (DST) MODE
For countries with daylight saving time (DST) (one hour of difference between
summer time and winter time), this clock radio offers you DST option to adjust
summer time.
In standby mode press and hold for 2 seconds the
The clock advances by one hour. To exit DST mode, repeat the above operation.
Setting Alarm 1 and Alarm 2
In standby mode, press the AL1 (15) or AL2 (14) button once to preview the
alarm time.The alarm time is displayed, press & hold the AL1 / AL2 buttons for
3 seconds and the hours will blink. Press AL1 / AL2 button (15/14) and keep
depress over 2 seconds to enter alarm set mode. Once in the setting mode,
press alarm set button (15/14) to change the mode cycle as follows:
Normal → AL 1 Hour → AL 1 Min → AL 1 weekday Alarm → AL 1 wake beep →
AL 1 wake radio → AL 1 wake radio volume →Normal.
Normal → AL 2 Hour → AL 2 Min → AL 2 weekday Alarm → AL 2 wake beep →
AL 2 wake radio → AL 2 wake radio volume →Normal.
time Min → Normal
or
button for 2 seconds to enable auto forward.
ALARM SETTING
15
/TUNE+/DST button (5).