Backup system
•
The unit is equipped with a backup system. It requires a 3 V CR2032
lithium battery (not included) . Insert the battery into the battery
compartment and make sure the positive and negative (+ or -) sides of
the battery are in contact with the corresponding terminals in the battery
compartment.
•
If a power failure occurs, the unit automatically switches to the battery
power supply and keeps the clock and timer settings.
•
To open the battery compartment, use a screwdriver to detach the screw
on the compartment door.
•
When replacing the battery, do not disconnect the power adapter.
Otherwise, all clock and alarm settings will be lost.
Setting the clock
1. In standby mode, press and hold the CLOCK button to enter the clock
setting mode.
2. Press the CLOCK button repeatedly to cycle through the setting options:
Year > Month/Day > Time
Setting year: Press the BACKWARD or FORWARD button.
•
Setting month/day: Press the BACKWARD button to set the month and
•
FORWARD button to set the day.
Setting the time: Press the BACKWARD button to set the hour time and
•
FORWARD button to set the minute time.
•
Press the SET button to confirm each setting option.
Using the antenna
Unroll and extend the antenna to improve FM signal reception.
Controlling the sound volume
While listening to the radio, press the VOL UP or DOWN button to control the
volume.
Listening to radio
1. Press the POWER button to switch the radio on.
2. Press the BACKWARD or FORWARD button to adjust frequency.
3. Press and hold the BACKWARD or FORWARD button to automatically tune
to the next available FM station.
4. Press the POWER button to switch the radio off.
15