Setting Alarms - Akai ACP-163 Bedienungsanleitung

Setting preset stations
You can store up to 10 preset stations.
1. Tune to a station.
2. Press and hold the MEM/M+ button until "P01" (or the next available preset
slot) shows on the display.
3. Press the BACKWARD or FORWARD button to select a preset number
(P01-P10).
4. Press the SET button to confirm. The preset station has been set up.
5. Press the MEM/M+ button repeatedly while listening to the radio to select a
preset station. Alternatively, press the MEM/M+ button once and then press
the BACKWARD or FORWARD button to select a preset station.
Using the alarms

Setting alarms

The radio lets you have 2 alarm settings. To set the alarms:
1. In standby mode, press and hold the ALARM 1 or ALARM 2 button to enter
the alarm time setting mode.
2. In the alarm setting mode, press the ALARM 1 or ALARM 2 repeatedly to
cycle through the setting options:
Alarm time > Alarm sound source > Alarm frequency
Setting alarm time: Press the BACKWARD to set the hour time and
•
FORWARD button to set the minute time.
Setting alarm sound source: Press the BACKWARD or FORWARD button
•
to select the alarm or radio as the alarm sound source. The corresponding
alarm indicator will turn on according to your selection.
Setting alarm frequency: Press the BACKWARD or FORWARD button
•
to select an alarm frequency (1-5 = Monday to Friday, 1-7 = Everyday, 6-7
= Weekend only).
Once the alarm setting is done, the alarm will be automatically activated with
the corresponding alarm indicator (alarm or radio) switched on.
**For one day alarm setting, just set the desired alarm time one day before.
Press any ALARM OFF button to switch off the alarm. After having switched off
the alarm, press the ALARM button again to clear the alarm setting (the alarm
indicator will be switched off).
To set another one day alarm, just repeat the above steps.
16