Technical Specifications; Safety Precautions - Storch Digi Dist Handbuch

Technical specifications

Recommended use
Measuring range
Measuring accuracy
Smallest unit displayed
Laser class
Laser type
Automatic switch off:
Estimated battery life
(use alkaline AAA batteries)
Battery
Optimum operating temperature
Storage temperature
Dimensions
Weight

Safety precautions

The device possesses a voltage range which can pose an electrical hazard to
humans and animals. This should only be screwed and / or disassembled by
authorised personnel. Similarly, maintenance and repair work should only be
conducted by electrical specialists and authorised service centres. The buyer
/ user operates the device at their own risk and under their own responsibi-
lity.
MAKE SURE you have read and understood all of the instructions in this
manual before using the product. Failure to follow all instructions may result
in exposure to laser radiation, electric shock, and/or bodily injury.
CAUTION: Do not attempt to modify the performance of the laser device in
any way. This may result in hazardous exposure to laser radiation.
LASER RADIATION. Do not stare into the beam. This is a class 2 laser pro-
duct. Only switch the laser on when using the device.
Improper execution of operational procedures or the use of operating and adjusting ele-
ments in a way other than that specified in this manual can result in hazardous exposure
to radiation.
The use of optical instruments such as telescopes, tachymeters or other similar devices
to view the laser beam can increase the risk of eye damage.
Indoors
0.1 - 50 m*
± 2 mm*
1 mm
2
λ
= 635nm P < 1mW
-Laser: 20 seconds
-Measuring device: 5 minutes
Up to 5,000
individual measurements
4 x 1.5 volt AAA batteries
-5° C to 40° C
-20° C to 60° C
113 x 56.4 x 35 mm
155g (without batteries)
75